I wasn’t satisfied about the most of the fan covers available on thingiverse, because the finer details aren’t optimized for 3D printing. That’s why I designed this customizable fan cover, where you are able to use different settings to create your own fan cover.

Customizable Settings

Check out the second picture for some of the available settings and the 3rd picture to sync the line size of the fan cover with the line width of your slicer. Use the Customizer or OpenSCAD to create your fan cover or use the pre-compiled fan covers as .stl-Files, optimized for 0.48mm line width (0.4mm nozzle).

Download

Download or customize this 3D Model on: https://www.thingiverse.com/thing:2802474

The post Customizable Fan Grill Cover appeared first on MightyNozzle.

Customize your own hair / beard / travel comb with this thing. On top, you can set a personal text like a name or whatever. There are innumerable different comb designs you can create.

Customizable Settings

Check out the pictures, which parameters of the comb you can set in the Customizer or OpenSCAD.

Download

Download or customize this 3D Model on: https://www.thingiverse.com/thing:2789072

The post Customizable Comb appeared first on MightyNozzle.

This is a customizable 3D Model that allows you to create and print aluminum extrusion brackets for different types and sizes of extrusion profiles.

I’ve also added the 21 brackets for 2020 and for the short side of the 2040 profile as .stl files.

If you need some hammer nuts with a good value for money, I can highly recommend these ones: hammer nuts
I used the Drillpro M5 hammer nuts for my AM8.

Customizable Settings

Use the Customizer or OpenSCAD to create your own customized set of brackets.

You only need to set these few parameters to get all the 21 brackets automatically:

• width of mounting side of the extrusion profile (20mm for 2020 profile)
• length and thickness of the bracket
• number of rails (2020 has 1, 2040 has 1 and 2 rails)
• screw hole settings

Download

Download this 3D Model on: https://www.thingiverse.com/thing:2503622

The post Customizable Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, …) appeared first on MightyNozzle.

This is a customizable thing, where you can print your own retro lightbox. These boxes normally costs >20 bucks, a printed one costs me about 5 dollar.

I’ve also added the two lightboxes as .stl files each with two different fonts that I’m using in the first picture.

The lid as well as the letter plates are chamfered. So you are able to slide the letter plates into the rails of the lid. After that you can slide the lid into the rails of the box. This ensures that these parts don’t fall out.

Customizable Settings

Use the Customizer or OpenSCAD to create your own customized retro Lightbox.

You can set:

• length, height and width of the box
• number of lines
• 2 different fonts: Siren Stencil (the little box in the picture) and Stardos Stencil (the big box)
• round edges of the lightbox
• size of the hole on the back, to insert your led light
• different thicknesses of the lid, letter plates and box

Light sources

I’ve ordered following lights from Banggood:

For a small lightbox:

• 10 LED with 2 AA-cell case (thats in my little lightbox): https://goo.gl/Hhj7Jh

For a medium lightbox:

• 1m LED strip with a switch and USB connector (thats in my big lightbox). I use it with a USB power bank: https://goo.gl/FazfhM and the power bank: https://goo.gl/jeEBAv
• 20 LED “snowman”. It has a 3 AA-cell case: https://goo.gl/8AEiPD

For a big lightbox:

• 2m LED strip USB powered: https://goo.gl/MWZb9k

Download

Download and customize this 3D Model on: https://www.thingiverse.com/thing:2498966

The post Customizable Retro Lightbox appeared first on MightyNozzle.

Customizable Settings

• set the length, height and width (picture 3)
• 3 different end styles: none, round and wedge (picture 4)
• set the angle and a smooth round end for wedge style

Changelog

v1.2 – 2017-07-31:

• [fix] reduced the tolerance of the threaded hole. If you have problems, to insert the screw in, you can change the tolerance in the Screw Settings (Advanced!) -> Screw Thread Hole Dia In Millimeter.
• [feature] parameter to add extra height of the screws head

v1.1 – 2017-06-27:

• [feature] added color
• [cosmetic] updated comment description for screw settings

Post Printing

Step 1

Cut a strip of a sheet of sanding paper in the width of the stick. The length should be about the hole around the stick to the second hole + a little extra length.

Step 2

Wrap the strip around the stick from the edge of the first hole beginning to the edge of the second hole. You may cut the length in this step. You can either use your fingers or the top part to hold the strip in place.

Step 3

Screw the first screw in. Then you can tension the strip, lift the top part a bit and push the end of the strip between the top and bottom part. Use the second screw now.
Optional: You can use pliers to tighten the screws, but don’t overtighten it!

Sanding Stick on Youtube

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2404850

The post Customizable Sanding Stick appeared first on MightyNozzle.

You can set following values:

• number of the edges
• choose between chamfered or straight one
• different sizes

Set these values in the Customizer and print the .stl file.

The Fidget Spinner in the picture is also customizable: https://www.thingiverse.com/thing:2369135

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2375961

The post Customizable Fidget Spinner Cap appeared first on MightyNozzle.

• You can create a cone, cylinder, cube, sphere, pyramid, star, flower and a dodecahedron shape. These are only the shapes I could find, but there are much more shapes to discover.
• You can customize different sizes and the hole for the bulb bracket.
• You can create a lamp shade as a ceiling lamp or a desk lamp or for a different purpose like a nice bowl or a vase.
• You can view some examples in the pictures above.

You can use the Thingiverse Customizer or OpenSCAD to create your lamp shade. If you need a more detailed preview of the lamp shade, I recommend you using OpenSCAD. The Scad-File is well documented to using it in OpenSCAD.

The light blue lamp socket, that I’m using together with this lamp shade is this silicone one with a long sleeved cable (picture 1 and 2). It is available in different colors: https://goo.gl/4Lx9Ux
The diameter of the bracket is 42mm.

I recommend you to use LED light bulbs, otherwise the lamp shade could melt. For the setup in the picture, I use 3x 2W Osram filament bulbs. This equals in total a 75W bulb.

Please share your customized lamp shades to the community! I would love to see them!

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2373638

The post Customizable Lamp Shade appeared first on MightyNozzle.

You can set following values:

• nuts or round objects (bearings, coins, etc..) as satellites
• number of arms
• different sizes

Set these values in the Customizer and print the .stl file.

The Fidget Spinner Caps in the picture are also customizable: https://www.thingiverse.com/thing:2375961

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2369135

The post Customizable Fidget Spinner – Nuts, Coins or Bearings as Satellite appeared first on MightyNozzle.

You can print a can cover and transform the waste into a nice and useful storage!

You only have to measure the inner and outer diameter of your empty can, set these values in the Customizer and print the .stl file.

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2366517

The post Customizable Can Cover – Save the Waste appeared first on MightyNozzle.

Now, I have enough weights to start with the balsa kit.
And maybe, there is someone else, who needs some weights or maybe these boxes for another purpose, like a silver coin compartment.
You can use the Customizer or the OpenSCAD file to customize your own weights or compartments with your currency. All parameters have a detailed description.

Update 2017-06-02:

• added an option to choose which parts needed (box, lid or both)
• added opening slot to remove the lid with a flathead screwdriver

Download

Customize and download this 3D Model on: https://www.thingiverse.com/thing:2358930

The post Customizable Penny Weight / Coin Compartment appeared first on MightyNozzle.