This is yet another case for the common RepRapDiscount Full Graphic Smart Controller. I wanted a 0.48mm line size (0.4mm nozzle * 1.2) optimized and small angled standalone case without mounting options.

Needed parts

• RepRapDiscount Full Graphic Smart Controller
• Printed parts
• 4pcs M3 16mm screws

Download

Download this 3D Model on: https://www.thingiverse.com/thing:2813298

The post RepRapDiscount Full Graphic Smart Controller Case appeared first on MightyNozzle.

Features:

• doesn’t need much filament (about 75g PLA).
• modular – you don’t have to throw the whole case away, if you change the board. You can just use or create another board holder. Thats 10g for a holder vs 100-200g for a whole case.
• no need to drill holes in your Anet A8 acrylic frame.
• you can use the board holder without the frame!

BOM:

• 3x M3x20 mm screw (alternative M3x8 or M3x10) for RAMPS board
• 4x M3x12mm screw (alternative M3x8 or M3x10) for Raspberry Pi 2/3
• 6x M3x8mm screw (alternative M3x10 or longer) for the case lid
• 4x M3x12mm screw, if you mount the case frame with normal nut and without washer. Use M3x16mm screw for nyloc nut w/o washer
• 2x M3x16mm screw for the board holder
• 6x M3 nut (or nyloc nut)
• optional 6x M3 washer

Electronics:

• 90° angled USB A to USB B cable, if you want use the RAMPS board together with the Raspberry Pi: https://goo.gl/raHXUa
• RAMPS 1.4 Board: https://goo.gl/YBxuOz
• Mega 2560 Board (Arduino Clone): https://goo.gl/rVB4LO
• 4-5x DRV8825 Stepper Driver: https://goo.gl/TpAO0U
• Raspberry Pi 2 or 3

Download

Download this 3D Model on: https://www.thingiverse.com/thing:2195886

The post Modular Anet A8 RAMPS 1.4 + Raspberry Pi 2/3 Case appeared first on MightyNozzle.